Portable Ozone Monitor Model ATS-101M
Our portable Ozone Monitor Model ATS-101M is a versatile monitor with ability to accurately measure the Ozone.Ozone concentration can be displayed in either PPM or mg/m3 on the large LCD Display.There are also defined high and low alarms set points which will trigger an audible/visual alarm when the ozone concentration exceeds the set point.
- Very easy to use
- Auto Suction Sampling Mode
- Long Life Rechargeable Li-one Battery
- Data Logger with RS-232 and USB computer Interface.
- Fit comfortably in the hand
- Re-calibrate sensor in the field or by returning to the factory
- Lithium battery allows a full 8 hours in the field
- Large Graphics display (128*64)
- Audible & Visual alarm
- Ozone process control.
- Personal exposure monitoring
- Source and Leak detection
- Health and safety monitoring.
- Principle: Electrochemical
- Range: 0.001-2 ppm/mg/M3
- Resolution: 0.001 Unit or 1 Unit (Application based)
- Sampling Method: In built Auto Suction
- Display:128 X 64 Graphics LCD
- Alarm:Two Levels Low & High, Visual and Audible
- Power Source: Built in Lithium Rechargeable battery
- Accuracy: +/2%
- Response Time: <5 Second
- Flow Rate: 2.84 L/M
- Data Storage: 1000 or 10000
- Sensor Life: 2-3 Years
- Operating Time: 6-8 hours
- Environmental Temperature: 0-55 Deg.C Humidity :< 85%RH
- Housing: High Impact Plastic
- Dimension in mm: 115 (W) X 180 (H) X 60(D)
- Weight: 0.6 KG
- Warranty: One Year