ATS-101M Portable Gas Leak Detector/Monitor

Send Inquiry

Request To Call Back

ATS-101M Portable Gas Leak Detector/Monitor

Price 32500 INR/ Unit

Get a Price/Quote

MOQ : 1 Unit

ATS-101M Portable Gas Leak Detector/Monitor Specification

Test Range
0-10000ppm

Response Time
3s

Features
Portable, High Sensitivity, Audible & Visual Alarms

Specimen Size
Handheld unit

Mounting Type
Handheld / Portable

Number of Specimens
1

Equipment Type
Portable Gas Leak Detector / Monitor

Application
Leakage detection for Flammable, Toxic, Explosive Gases

Display Type
LCD Display

Resolution
1ppm

Automation Grade
Automatic

Humidity
0-99% RH

Temperature
-10C to 55C

Interface Type
RS232

Operating Voltage
3.7V DC (Lithium battery)

Measuring Range
0-10000ppm

Power Supply
Lithium Battery / 220V Charger

Accuracy
3% F.S.

Port Size
Standard 3mm inlet

Gas Pressure
0.85MPa

Usage
Industrial & Safety

Machine Weight
450g

Control Mode
Microprocessor

Dimension
160mm x 60mm x 36mm

Alarm Type
Audible and Visual (LED indicator & Buzzer)

Alarm Setting
Configurable threshold ppm

Data Storage
Built-in storage for 1000 data logs

Calibration
User manual calibration

Sensor Type
High precision electrochemical sensor

Sampling Method
Pump suction

Charging Time
4-6 hours

Battery Life
8 hours continuous operation

Protection Rating
IP54

About ATS-101M Portable Gas Leak Detector/Monitor

ATS-101M Portable Gas Leak Detector/Monitor is portable Single/Dubel Gas Detectors are capable of detecting Oxygen, Toxic, and Combustible gases making them ideal for use in various environments. Compact ,Light weight Intelligent Unit with Application Specific Sensors Sensitive to PPB / PPM or % age levels og gases & Vapors.

Features:

Complete Automatic Operation
LCD Display
Continous Diffusion / Suction Sampling
Confidence Beep every 15 seconds
Complete self Interity check on start
Automatic Calibration
Display of WARN & ALARM
Low Battery Alarm

Specification:

Overall ranges: PPB / PPM /% V/V% LEL
Sampling Method: Diffusion (D) or Suction (S)
Principle: Specific to APplication
Sensor Life: 2-5 Years
Measurement: Continuous
Display: Graphic LCD
Accuracy: +/-2% & 0.5% for oxygen
Response time: < 10 seconds at 95% variation
Housing : High Impact Plastic (ABS)
Power supply: Lithium Rechargeable Battery.

High Sensitivity and Fast Response

Equipped with a high precision electrochemical sensor and advanced microprocessor control, the ATS-101M detects gas leaks with remarkable sensitivity. Its pump suction sampling ensures gas is detected rapidly, and alarms respond within 3 seconds, safeguarding personnel and environments from hazardous exposure.

User-Friendly Portability

Weighing just 450g and boasting a slim, handheld design, the ATS-101M is simple to carry and use in various industrial settings. Its lithium battery supports up to 8 hours of field operation, and built-in storage allows for logging 1000 measurements, making it convenient for field inspections and routine maintenance.

FAQ's of ATS-101M Portable Gas Leak Detector/Monitor:

Q: How do I calibrate the ATS-101M Portable Gas Leak Detector?

A: The device supports manual user calibration following the procedure outlined in the provided user manual. Regular calibration ensures sustained accuracy in gas detection.

Q: What types of gases can the ATS-101M detect?

A: The detector is designed for leakage detection of flammable, toxic, and explosive gases within the measuring range of 0-10,000ppm.

Q: When should I recharge the detector, and how long does it take?

A: Recharge the built-in lithium battery after approximately 8 hours of continuous use or when indicated by the device. A full charge takes between 4 and 6 hours using the supplied 220V charger.

Q: Where can the ATS-101M be used effectively?

A: This monitor is ideal for industrial environments requiring portable detection, including oil, chemical, gas storage, and manufacturing plants, thanks to its IP54 protection against dust and splashes.

Q: What is the benefit of the built-in data storage for 1000 logs?

A: Integrated data storage allows users to record and review historical gas concentration readings, supporting compliance, safety analysis, and traceability during inspections.

Q: How does the alarm system work on the ATS-101M?

A: The detector features both audible and visual alarms, including a loud buzzer and LED indicators, which alert users when gas concentrations exceed a user-configurable threshold.

Q: What is the process for taking a measurement with the ATS-101M?

A: To measure gas concentrations, simply power on the device, connect the 3mm inlet to the test area, and allow the pump to draw in the sample. The LCD display will rapidly show real-time readings, and data will be logged automatically.

Tell us about your requirement